DIY Clock – the screen

I finally received the first pieces for my DIY clock, including the led matrix.

After some work (soldering the screen and the arduino, cutting the box) here is what the display will look like :

Top of the box before being cut

tests with my arduino

Example of display in the box

3D image of what was my idea

I’m now going to test the gesture sensor to see if I can use it with my clock.

I also received a cheap wifi transceiver, my goal is to be able to set time with the wifi, and maybe autoset the time of the alarm by syncing it with my calendar.

About the quadcopter : it did some try outside, it flew for 0.5sec and crashed on the ground, I have to buy new propellers for the next tests …